View groups and posts below.
This post is from a suggested group
I am using the ADTi 24MP 24L V2 Surveyor Lite Drone Mapping Camera for mapping missions at 8–10 m/s drone speed.
Could you please suggest the recommended camera settings, trigger rate/photo interval, and the best lens option for optimal mapping performance?
This post is from a suggested group
The HDMI output of ADti 26V1 is 1080i. Does anyone know how to set it, if possible, to 1080p or 720p?
This post is from a suggested group
we have prefectly balance and tested our custom made XPORT gimbal with PSDK, it has been working for aerial mapping and photography over 3 months without any issue!
Aircraft: DJI Matrice 400
Gimbal: ADTI Xport gimbal with custom made mounting system and PSDK
Camera: Sony ILX-LR1
Lens: Samyang AF85F1.8P FE
Altitude: 120 AGL
This post is from a suggested group
This post is from a suggested group
This post is from a suggested group
Has anyone sussessfully connected the ENTIRE R3 on a Gremsy Mio with a 24S V3 so that the ENTIRE R3 is connected to the Gremsy MTX Hub and the S24 V3 is connected to the Auxilary port on the Gremsy next to the camera mount. How is then then connected to the Pixhawk?
also where do I get spare main port (ACC) cables for the 24S v3 camera?
Its taken some time to work this out as there is no info specificaly for this setup or premade cables. I will be attempting this in about 2-4 weeks. plug a telemetry cable from pixhawk telm port into one of the UNI ports, you will need to power the ENTIRE from a 5V BEC and wifi onto it to program the rest. You will need to program the Entire R3 to do mavlink passthrough on another UNI port to control the camera using the camera app ion Mission Planner, shutter cable into EXT and trigger from Pin 5 of the USB Multi. Ill be running all this through the AUX port so that I canb connect direct to the camera from the roll axis AUX porty on the gimbal.
you will need telemetry to the gimbal as well which can come from the Entire R3 uni port
I got extra cables from adti and Gremsy and the Entire R3 guys for the camera in case I stuffed it remember there is 12V from the roll AUX port so you dont need to pa power seperately over the AUX pins.
ENTIRE R3 cables go throuth AUX to camera.
This post is from a suggested group
it is available on UnmannedRC website, if anyone has inquiries please free feel to reach me , thank you
This post is from a suggested group
photo sample as below: it is compressed by website view so I have orignial photos, please leave your email I will send you the sharable link!